Pneumatic --> Pneumatic Cylinders --> Position Sensors and Switches

Round Cylinder Brackets

STEP 1 - Start By Keeping Screw 3 To 4 Turns Into Barrel Nut On The End OF The Band Assembly.
STEP 2 - Place The Screw Head Into The Clamp and Wrap The Band Around The Cylinder.
Position The Pin With The Nearest Hole On The Band And Mark The Hole With A Permanent Marker.
STEP 3 - Remove Clamp Assembly.Cut The Band At Next 2 Adjacent Hole From Marked Hole.
STEP 4 - Insert Cut End Of The Band Into Flat Slot opposite From The Clamp Slot.Place The Chosen Hole Over The Pin And Bend The Band Firmly Down With Thumb Pressure.Wrap The Band Around Cylinder
Barrel And Reinsert Screw Head Into Clamp.
Position The Switch And Tighten.